/**
  ******************************************************************************
  * @file stm8l10x_gpio.h
  * @brief This file contains all functions prototype and macros for the GPIO peripheral.
  * @author STMicroelectronics - MCD Application Team
  * @version V1.1.0
  * @date    09/14/2009
  ******************************************************************************
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
  * @image html logo.bmp
  ******************************************************************************
  */

/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM8L10x_GPIO_H
#define __STM8L10x_GPIO_H

/* Includes ------------------------------------------------------------------*/
#include "stm8l10x.h"

/* Exported variables ------------------------------------------------------- */
/* Exported types ------------------------------------------------------------*/

/** @addtogroup GPIO_Exported_Types
  * @{
  */

/**
  * @brief GPIO modes
  *
  * Bits definitions:
  * - Bit 7: 0 = INPUT mode
  *          1 = OUTPUT mode
  *          1 = PULL-UP (input) or PUSH-PULL (output)
  * - Bit 5: 0 = No external interrupt (input) or No slope control (output)
  *          1 = External interrupt (input) or Slow control enabled (output)
  * - Bit 4: 0 = Low level (output)
  *          1 = High level (output push-pull) or HI-Z (output open-drain)
  */
typedef enum
{
    GPIO_Mode_In_FL_No_IT      = (uint8_t)0x00, // 0b00000000, 	/*!< Input floating, no external interrupt */
    GPIO_Mode_In_PU_No_IT      = (uint8_t)0x40, // 0b01000000, 	/*!< Input pull-up, no external interrupt */
    GPIO_Mode_In_FL_IT         = (uint8_t)0x20, // 0b00100000, 	/*!< Input floating, external interrupt */
    GPIO_Mode_In_PU_IT         = (uint8_t)0x60, // 0b01100000, 	/*!< Input pull-up, external interrupt */
    GPIO_Mode_Out_OD_Low_Fast  = (uint8_t)0xA0, // 0b10100000, 	/*!< Output open-drain, low level, 10MHz */
    GPIO_Mode_Out_PP_Low_Fast  = (uint8_t)0xE0, // 0b11100000, 	/*!< Output push-pull, low level, 10MHz */
    GPIO_Mode_Out_OD_Low_Slow  = (uint8_t)0x80, // 0b10000000, 	/*!< Output open-drain, low level, 2MHz */
    GPIO_Mode_Out_PP_Low_Slow  = (uint8_t)0xC0, // 0b11000000, 	/*!< Output push-pull, low level, 2MHz */
    GPIO_Mode_Out_OD_HiZ_Fast  = (uint8_t)0xB0, // 0b10110000, 	/*!< Output open-drain, high-impedance level, 10MHz */
    GPIO_Mode_Out_PP_High_Fast = (uint8_t)0xF0, // 0b11110000, 	/*!< Output push-pull, high level, 10MHz */
    GPIO_Mode_Out_OD_HiZ_Slow  = (uint8_t)0x90, // 0b10010000, 	/*!< Output open-drain, high-impedance level, 2MHz */
    GPIO_Mode_Out_PP_High_Slow = (uint8_t)0x0D, // 0b11010000  	/*!< Output push-pull, high level, 2MHz */
}GPIO_Mode_TypeDef;

/**
  * @brief Definition of the GPIO pins. Used by the @ref GPIO_Init function in
  * order to select the pins to be initialized.
  */

typedef enum
{
    GPIO_Pin_0    =((uint8_t)0x01), 	/*!< Pin 0 selected */
    GPIO_Pin_1    =((uint8_t)0x02), 	/*!< Pin 1 selected */
    GPIO_Pin_2    =((uint8_t)0x04), 	/*!< Pin 2 selected */
    GPIO_Pin_3    =((uint8_t)0x08),	 	/*!< Pin 3 selected */
    GPIO_Pin_4    =((uint8_t)0x10), 	/*!< Pin 4 selected */
    GPIO_Pin_5    =((uint8_t)0x20), 	/*!< Pin 5 selected */
    GPIO_Pin_6    =((uint8_t)0x40), 	/*!< Pin 6 selected */
    GPIO_Pin_7    =((uint8_t)0x80), 	/*!< Pin 7 selected */
    GPIO_Pin_LNib =((uint8_t)0x0F), 	/*!< Low nibble pins selected */
    GPIO_Pin_HNib =((uint8_t)0xF0), 	/*!< High nibble pins selected */
    GPIO_Pin_All  =((uint8_t)0xFF) 		/*!< All pins selected */
}GPIO_Pin_TypeDef;

/**
  * @}
  */

/* Exported constants --------------------------------------------------------*/
/* Exported macros -----------------------------------------------------------*/
/* Private macros ------------------------------------------------------------*/

/** @addtogroup GPIO_Private_Macros
  * @{
  */

/**
  * @brief Macro used by the assert function to check the different functions parameters.
  */

/**
  * @brief Macro used by the assert function in order to check the different
  * values of GPIOMode_TypeDef.
  */
#define IS_GPIO_MODE(MODE) \
   (((MODE) == GPIO_Mode_In_FL_No_IT) 			|| \
    ((MODE) == GPIO_Mode_In_PU_No_IT) 			|| \
    ((MODE) == GPIO_Mode_In_FL_IT)    			|| \
    ((MODE) == GPIO_Mode_In_PU_IT)    			|| \
    ((MODE) == GPIO_Mode_Out_OD_Low_Fast) 	|| \
    ((MODE) == GPIO_Mode_Out_PP_Low_Fast) 	|| \
		((MODE) == GPIO_Mode_Out_OD_Low_Slow) 	|| \
    ((MODE) == GPIO_Mode_Out_PP_Low_Slow) 	|| \
    ((MODE) == GPIO_Mode_Out_OD_HiZ_Fast) 	|| \
		((MODE) == GPIO_Mode_Out_PP_High_Fast) 	|| \
		((MODE) == GPIO_Mode_Out_OD_HiZ_Slow) 	|| \
    ((MODE) == GPIO_Mode_Out_PP_High_Slow))

/**
  * @brief Macro used by the assert function in order to check the different
  * values of GPIO_Pins.
  */
#define IS_GPIO_PIN(PIN) ((PIN) != (uint8_t)0x00)

/**
  * @}
  */

/* Exported functions ------------------------------------------------------- */
/** @addtogroup GPIO_Exported_Functions
  * @{
  */

void GPIO_DeInit(GPIO_TypeDef* GPIOx);
void GPIO_Init(GPIO_TypeDef* GPIOx, uint8_t GPIO_Pin, GPIO_Mode_TypeDef GPIO_Mode);
void GPIO_Write(GPIO_TypeDef* GPIOx, uint8_t GPIO_PortVal);
void GPIO_WriteBit(GPIO_TypeDef* GPIOx, GPIO_Pin_TypeDef GPIO_Pin, BitAction GPIO_BitVal);
void GPIO_SetBits(GPIO_TypeDef* GPIOx, uint8_t GPIO_Pin);
void GPIO_ResetBits(GPIO_TypeDef* GPIOx, uint8_t GPIO_Pin);
void GPIO_ToggleBits(GPIO_TypeDef* GPIOx, uint8_t GPIO_Pin);
uint8_t GPIO_ReadInputData(GPIO_TypeDef* GPIOx);
uint8_t GPIO_ReadOutputData(GPIO_TypeDef* GPIOx);
BitStatus GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, GPIO_Pin_TypeDef GPIO_Pin);
BitStatus GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, GPIO_Pin_TypeDef GPIO_Pin);
void GPIO_ExternalPullUpConfig(GPIO_TypeDef* GPIOx, uint8_t GPIO_Pin, FunctionalState NewState);

/**
  * @}
  */

#endif /* __STM8L10x_GPIO_H */

/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/