/**
  ******************************************************************************
  * @file stm8l10x_tim2.c
  * @brief This file contains all the functions for the TIM2 peripheral.
  * @author STMicroelectronics - MCD Application Team
  * @version V1.1.0
  * @date    09/14/2009
  ******************************************************************************
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
  * @image html logo.bmp
  ******************************************************************************
  */

/* Includes ------------------------------------------------------------------*/
#include "stm8l10x_tim2.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
static void TI1_Config(TIM2_ICPolarity_TypeDef TIM2_ICPolarity,
                       TIM2_ICSelection_TypeDef TIM2_ICSelection,
                       uint8_t TIM2_ICFilter);
static void TI2_Config(TIM2_ICPolarity_TypeDef TIM2_ICPolarity,
                       TIM2_ICSelection_TypeDef TIM2_ICSelection,
                       uint8_t TIM2_ICFilter);


/**
  * @addtogroup TIM2_Public_Functions
  * @{
  */

/**
  * @brief Deinitializes the TIM2 peripheral registers to their default reset values.
  * @par Parameters:
	* None
  * @retval None
  */
void TIM2_DeInit(void)
{
    TIM2->CR1 = TIM_CR1_RESET_VALUE;
    TIM2->CR2 = TIM_CR2_RESET_VALUE;
    TIM2->SMCR = TIM_SMCR_RESET_VALUE;
    TIM2->ETR = TIM_ETR_RESET_VALUE;
    TIM2->IER = TIM_IER_RESET_VALUE;
    TIM2->SR2 = TIM_SR2_RESET_VALUE;

    /* Disable channels */
    TIM2->CCER1 = TIM_CCER1_RESET_VALUE;
    /* Configure channels as inputs: it is necessary if lock level is equal to 2 or 3 */
    TIM2->CCMR1 = 0x01;/*TIM2_ICxSource_TIxFPx */
    TIM2->CCMR2 = 0x01;/*TIM2_ICxSource_TIxFPx */

    /* Then reset channel registers: it also works if lock level is equal to 2 or 3 */
    TIM2->CCER1 = TIM_CCER1_RESET_VALUE;
    TIM2->CCMR1 = TIM_CCMR1_RESET_VALUE;
    TIM2->CCMR2 = TIM_CCMR2_RESET_VALUE;

    TIM2->CNTRH = TIM_CNTRH_RESET_VALUE;
    TIM2->CNTRL = TIM_CNTRL_RESET_VALUE;

    TIM2->PSCR = TIM_PSCR_RESET_VALUE;

    TIM2->ARRH = TIM_ARRH_RESET_VALUE;
    TIM2->ARRL = TIM_ARRL_RESET_VALUE;

    TIM2->CCR1H = TIM_CCR1H_RESET_VALUE;
    TIM2->CCR1L = TIM_CCR1L_RESET_VALUE;
    TIM2->CCR2H = TIM_CCR2H_RESET_VALUE;
    TIM2->CCR2L = TIM_CCR2L_RESET_VALUE;

    TIM2->OISR = TIM_OISR_RESET_VALUE;
    TIM2->EGR = 0x01;/*TIM_EGR_UG;*/
    TIM2->BKR = TIM_BKR_RESET_VALUE;
    TIM2->SR1 = TIM_SR1_RESET_VALUE;
}

/**
  * @brief Initializes the TIM2 Time Base Unit according to the specified  parameters.
  * @param[in] TIM2_Prescaler : This parameter can be any member of the @Ref TIM2_Prescaler_TypeDef enumeration.
  * @param[in] TIM2_CounterMode : This parameter can be any member of the @Ref TIM2_CounterMode_TypeDef enumeration.
  * @param[in] TIM2_Period : This parameter must be a value between 0x0000 and 0xFFFF.
  * @retval None
  */
void TIM2_TimeBaseInit(TIM2_Prescaler_TypeDef TIM2_Prescaler,
                       TIM2_CounterMode_TypeDef TIM2_CounterMode,
                       uint16_t TIM2_Period)
{

    assert_param(IS_TIM2_PRESCALER(TIM2_Prescaler));
    assert_param(IS_TIM2_COUNTER_MODE(TIM2_CounterMode));



    /* Set the Autoreload value */
    TIM2->ARRH = (uint8_t)(TIM2_Period >> 8) ;
    TIM2->ARRL = (uint8_t)(TIM2_Period);

    /* Set the Prescaler value */
    TIM2->PSCR = (uint8_t)(TIM2_Prescaler);

    /* Select the Counter Mode */
    TIM2->CR1 &= (uint8_t)((uint8_t)(~TIM_CR1_CMS)) & ((uint8_t)(~TIM_CR1_DIR));
    TIM2->CR1 |= (uint8_t)(TIM2_CounterMode);
}

/**
  * @brief Initializes the TIM2 Channel1 according to the specified parameters.
  * @param[in] TIM2_OCMode : This parameter can be any member of the @Ref TIM2_OCMode_TypeDef enumeration.
  * @param[in] TIM2_OutputState : This parameter can be any member of the @Ref TIM2_OutputState_TypeDef enumeration.
  * @param[in] TIM2_Pulse : This parameter must be a value between 0x0000 and 0xFFFF.
  * @param[in] TIM2_OCPolarity : This parameter can be any member of the @Ref TIM2_OCPolarity_TypeDef enumeration.
  * @param[in] TIM2_OCIdleState : This parameter can be any member of the @Ref TIM2_OCIdleState_TypeDef  enumeration.
  * @retval None
  */
void TIM2_OC1Init(TIM2_OCMode_TypeDef TIM2_OCMode,
                  TIM2_OutputState_TypeDef TIM2_OutputState,
                  uint16_t TIM2_Pulse,
                  TIM2_OCPolarity_TypeDef TIM2_OCPolarity,
                  TIM2_OCIdleState_TypeDef TIM2_OCIdleState)
{
    uint8_t tmpccmr1 = 0;

    /* Check the parameters */
    assert_param(IS_TIM2_OC_MODE(TIM2_OCMode));
    assert_param(IS_TIM2_OUTPUT_STATE(TIM2_OutputState));
    assert_param(IS_TIM2_OC_POLARITY(TIM2_OCPolarity));
    assert_param(IS_TIM2_OCIDLE_STATE(TIM2_OCIdleState));

    tmpccmr1 = TIM2->CCMR1;

    /* Disable the Channel 1: Reset the CCE Bit */
    TIM2->CCER1 &= (uint8_t)(~TIM_CCER1_CC1E);
    /* Reset the Output Compare Bits */
    tmpccmr1 &= (uint8_t)(~TIM_CCMR_OCM);

    /* Set the Ouput Compare Mode */
    tmpccmr1 |= (uint8_t)TIM2_OCMode;

    TIM2->CCMR1 = tmpccmr1;

    /* Set the Output State */
    if (TIM2_OutputState == TIM2_OutputState_Enable)
    {
        TIM2->CCER1 |= TIM_CCER1_CC1E;
    }
    else
    {
        TIM2->CCER1 &= (uint8_t)(~TIM_CCER1_CC1E);
    }

    /* Set the Output Polarity */
    if (TIM2_OCPolarity == TIM2_OCPolarity_Low)
    {
        TIM2->CCER1 |= TIM_CCER1_CC1P;
    }
    else
    {
        TIM2->CCER1 &= (uint8_t)(~TIM_CCER1_CC1P);
    }

    /* Set the Output Idle state */
    if (TIM2_OCIdleState == TIM2_OCIdleState_Set)
    {
        TIM2->OISR |= TIM_OISR_OIS1;
    }
    else
    {
        TIM2->OISR &= (uint8_t)(~TIM_OISR_OIS1);
    }

    /* Set the Pulse value */
    TIM2->CCR1H = (uint8_t)(TIM2_Pulse >> 8);
    TIM2->CCR1L = (uint8_t)(TIM2_Pulse);
}

/**
  * @brief Initializes the TIM2 Channel2 according to the specified parameters.
	* @param[in] TIM2_OCMode : This parameter can be any member of the @Ref TIM2_OCMode_TypeDef enumeration.
  * @param[in] TIM2_OutputState : This parameter can be any member of the @Ref TIM2_OutputState_TypeDef enumeration.
  * @param[in] TIM2_Pulse : This parameter must be a value between 0x0000 and 0xFFFF.
  * @param[in] TIM2_OCPolarity : This parameter can be any member of the @Ref TIM2_OCPolarity_TypeDef enumeration.
  * @param[in] TIM2_OCIdleState : This parameter can be any member of the @Ref TIM2_OCIdleState_TypeDef  enumeration.
  * @retval None
  */
void TIM2_OC2Init(TIM2_OCMode_TypeDef TIM2_OCMode,
                  TIM2_OutputState_TypeDef TIM2_OutputState,
                  uint16_t TIM2_Pulse,
                  TIM2_OCPolarity_TypeDef TIM2_OCPolarity,
                  TIM2_OCIdleState_TypeDef TIM2_OCIdleState)
{
    uint8_t tmpccmr2 = 0;

    /* Check the parameters */
    assert_param(IS_TIM2_OC_MODE(TIM2_OCMode));
    assert_param(IS_TIM2_OUTPUT_STATE(TIM2_OutputState));
    assert_param(IS_TIM2_OC_POLARITY(TIM2_OCPolarity));
    assert_param(IS_TIM2_OCIDLE_STATE(TIM2_OCIdleState));

    tmpccmr2 = TIM2->CCMR2;

    /* Disable the Channel 2: Reset the CCE Bit */
    TIM2->CCER1 &= (uint8_t)(~TIM_CCER1_CC2E);

    /* Reset the Output Compare Bits */
    tmpccmr2 &= (uint8_t)(~TIM_CCMR_OCM);

    /* Set the Ouput Compare Mode */
    tmpccmr2 |= (uint8_t)TIM2_OCMode;

    TIM2->CCMR2 = tmpccmr2;

    /* Set the Output State */
    if (TIM2_OutputState == TIM2_OutputState_Enable)
    {
        TIM2->CCER1 |= TIM_CCER1_CC2E;
    }
    else
    {
        TIM2->CCER1 &= (uint8_t)(~TIM_CCER1_CC2E);
    }

    /* Set the Output Polarity */
    if (TIM2_OCPolarity == TIM2_OCPolarity_Low)
    {
        TIM2->CCER1 |= TIM_CCER1_CC2P;
    }
    else
    {
        TIM2->CCER1 &= (uint8_t)(~TIM_CCER1_CC2P);
    }


    /* Set the Output Idle state */
    if (TIM2_OCIdleState == TIM2_OCIdleState_Set)
    {
        TIM2->OISR |= TIM_OISR_OIS2;
    }
    else
    {
        TIM2->OISR &= (uint8_t)(~TIM_OISR_OIS2);
    }

    /* Set the Pulse value */
    TIM2->CCR2H = (uint8_t)(TIM2_Pulse >> 8);
    TIM2->CCR2L = (uint8_t)(TIM2_Pulse);
}

/**
  * @brief Configures the Break feature, dead time, Lock level, the OSSI,
  * and the AOE(automatic output enable).
  * @param[in] TIM2_OSSIState : Off-State Selection for Idle mode states.
	* This parameter can be any member of the @Ref TIM2_OSSIState_TypeDef enumeration.
  * @param[in] TIM2_LockLevel : Lock level.
	* This parameter can be any member of the @Ref TIM2_LockLevel_TypeDef enumeration.
  * @param[in] TIM2_BreakState : Break Input enable/disable .
	* This parameter can be any member of the @Ref TIM2_BreakState_TypeDef enumeration.
  * @param[in] TIM2_BreakPolarity : Break Polarity.
	* This parameter can be any member of the @Ref TIM2_BreakPolarity_TypeDef enumeration.
  * @param[in] TIM2_AutomaticOutput : TIM2 AOE Bit Set/Reset .
	* This parameter can be anymember  of the @Ref TIM2_AutomaticOutput_TypeDef enumeration.
  * @retval None
  */
void TIM2_BKRConfig(TIM2_OSSIState_TypeDef TIM2_OSSIState,
                    TIM2_LockLevel_TypeDef TIM2_LockLevel,
                    TIM2_BreakState_TypeDef TIM2_BreakState,
                    TIM2_BreakPolarity_TypeDef TIM2_BreakPolarity,
                    TIM2_AutomaticOutput_TypeDef TIM2_AutomaticOutput)

{
    /* Check the parameters */
    assert_param(IS_TIM2_OSSI_STATE(TIM2_OSSIState));
    assert_param(IS_TIM2_LOCK_LEVEL(TIM2_LockLevel));
    assert_param(IS_TIM2_BREAK_STATE(TIM2_BreakState));
    assert_param(IS_TIM2_BREAK_POLARITY(TIM2_BreakPolarity));
    assert_param(IS_TIM2_AUTOMATIC_OUTPUT_STATE(TIM2_AutomaticOutput));



    /* Set the Lock level, the Break enable Bit and the Ploarity, the OSSI State,
    the dead time value and the Automatic Output Enable Bit */

    TIM2->BKR = (uint8_t)((uint8_t)TIM2_OSSIState|(uint8_t)TIM2_LockLevel| \
                          (uint8_t)TIM2_BreakState|(uint8_t)TIM2_BreakPolarity|\
                          (uint8_t)TIM2_AutomaticOutput);
}

/**
  * @brief Initializes the TIM2 peripheral according to the specified parameters.
  * @param[in] TIM2_Channel : This parameter can be any member of the @Ref TIM2_Channel_TypeDef enumeration.
  * @param[in] TIM2_ICPolarity : This parameter can be any member of the @Ref TIM2_ICPolarity_TypeDef enumeration.
  * @param[in] TIM2_ICSelection : This parameter can be any member of the @Ref TIM2_ICSelection_TypeDef enumeration.
  * @param[in] TIM2_ICPrescaler : This parameter can be any member of the @Ref TIM2_ICPSC_TypeDef enumeration.
  * @param[in] TIM2_ICFilter : This parameter must be a value between 0x00 and 0x0F.
  * @retval None
  */
void TIM2_ICInit(TIM2_Channel_TypeDef TIM2_Channel,
                 TIM2_ICPolarity_TypeDef TIM2_ICPolarity,
                 TIM2_ICSelection_TypeDef TIM2_ICSelection,
                 TIM2_ICPSC_TypeDef TIM2_ICPrescaler,
                 uint8_t TIM2_ICFilter)
{
    /* Check the parameters */
    assert_param(IS_TIM2_CHANNEL(TIM2_Channel));

    if (TIM2_Channel == TIM2_Channel_1)
    {
        /* TI1 Configuration */
        TI1_Config(TIM2_ICPolarity,
                   TIM2_ICSelection,
                   TIM2_ICFilter);

        /* Set the Input Capture Prescaler value */
        TIM2_SetIC1Prescaler(TIM2_ICPrescaler);
    }
    else /* if (TIM2_Channel == TIM2_Channel_2) */
    {
        /* TI2 Configuration */
        TI2_Config(TIM2_ICPolarity,
                   TIM2_ICSelection,
                   TIM2_ICFilter);
        /* Set the Input Capture Prescaler value */
        TIM2_SetIC2Prescaler(TIM2_ICPrescaler);
    }
}

/**
  * @brief Configures the TIM2 peripheral in PWM Input Mode according to the
  * specified parameters.
  * @param[in] TIM2_Channel : This parameter can be any member of the @Ref TIM2_Channel_TypeDef enumeration.
  * @param[in] TIM2_ICPolarity : This parameter can be any member of the @Ref TIM2_ICPolarity_TypeDef enumeration.
  * @param[in] TIM2_ICSelection : This parameter can be any member of the @Ref TIM2_ICSelection_TypeDef enumeration.
  * @param[in] TIM2_ICPrescaler : This parameter can be any member of the @Ref TIM2_ICPSC_TypeDef enumeration.
  * @param[in] TIM2_ICFilter : This parameter must be a value between 0x00 and 0x0F.
  * @retval None
  */
void TIM2_PWMIConfig(TIM2_Channel_TypeDef TIM2_Channel,
                     TIM2_ICPolarity_TypeDef TIM2_ICPolarity,
                     TIM2_ICSelection_TypeDef TIM2_ICSelection,
                     TIM2_ICPSC_TypeDef TIM2_ICPrescaler,
                     uint8_t TIM2_ICFilter)
{
    uint8_t icpolarity = TIM2_ICPolarity_Rising;
    uint8_t icselection = TIM2_ICSelection_DirectTI;

    /* Check the parameters */
    assert_param(IS_TIM2_CHANNEL(TIM2_Channel));

    /* Select the Opposite Input Polarity */
    if (TIM2_ICPolarity == TIM2_ICPolarity_Rising)
    {
        icpolarity = TIM2_ICPolarity_Falling;
    }
    else
    {
        icpolarity = TIM2_ICPolarity_Rising;
    }

    /* Select the Opposite Input */
    if (TIM2_ICSelection == TIM2_ICSelection_DirectTI)
    {
        icselection = TIM2_ICSelection_IndirectTI;
    }
    else
    {
        icselection = TIM2_ICSelection_DirectTI;
    }

    if (TIM2_Channel == TIM2_Channel_1)
    {
        /* TI1 Configuration */
        TI1_Config(TIM2_ICPolarity, TIM2_ICSelection,
                   TIM2_ICFilter);

        /* Set the Input Capture Prescaler value */
        TIM2_SetIC1Prescaler(TIM2_ICPrescaler);

        /* TI2 Configuration */
        TI2_Config((TIM2_ICPolarity_TypeDef)icpolarity, (TIM2_ICSelection_TypeDef)icselection, TIM2_ICFilter);

        /* Set the Input Capture Prescaler value */
        TIM2_SetIC2Prescaler(TIM2_ICPrescaler);
    }
    else
    {
        /* TI2 Configuration */
        TI2_Config(TIM2_ICPolarity, TIM2_ICSelection,
                   TIM2_ICFilter);

        /* Set the Input Capture Prescaler value */
        TIM2_SetIC2Prescaler(TIM2_ICPrescaler);

        /* TI1 Configuration */
        TI1_Config((TIM2_ICPolarity_TypeDef)icpolarity, (TIM2_ICSelection_TypeDef)icselection, TIM2_ICFilter);

        /* Set the Input Capture Prescaler value */
        TIM2_SetIC1Prescaler(TIM2_ICPrescaler);
    }
}

/**
  * @brief Enables or disables the TIM2 peripheral.
  * @param[in] NewState : The new state of the TIM2 peripheral.
  * This parameter can be any of the @ref FunctionalState enumeration.
  * @retval None
  */
void TIM2_Cmd(FunctionalState NewState)
{
    /* Check the parameters */
    assert_param(IS_FUNCTIONAL_STATE(NewState));

    /* set or Reset the CEN Bit */
    if (NewState != DISABLE)
    {
        TIM2->CR1 |= TIM_CR1_CEN;
    }
    else
    {
        TIM2->CR1 &= (uint8_t)(~TIM_CR1_CEN);
    }
}

/**
  * @brief Enables or disables the TIM2 peripheral Main Outputs.
  * @param[in] NewState : The new state of the TIM2 peripheral.
  * This parameter can be any of the @ref FunctionalState enumeration.
  * @retval None
  */
void TIM2_CtrlPWMOutputs(FunctionalState NewState)
{
    /* Check the parameters */
    assert_param(IS_FUNCTIONAL_STATE(NewState));

    /* Set or Reset the MOE Bit */

    if (NewState != DISABLE)
    {
        TIM2->BKR |= TIM_BKR_MOE ;
    }
    else
    {
        TIM2->BKR &= (uint8_t)(~TIM_BKR_MOE) ;
    }
}

/**
  * @brief Enables or disables the specified TIM2 interrupts.
  * @param[in] TIM2_IT : Specifies the TIM2 interrupts sources to be enabled or disabled.
  * This parameter can be any combination of the @ref TIM2_IT_TypeDef enumeration.
  * @param[in] NewState : The new state of the TIM2 peripheral.
  * This parameter can be any of the @ref FunctionalState enumeration.
  * @retval None
  */
void TIM2_ITConfig(TIM2_IT_TypeDef TIM2_IT, FunctionalState NewState)
{
    /* Check the parameters */
    assert_param(IS_TIM2_IT(TIM2_IT));
    assert_param(IS_FUNCTIONAL_STATE(NewState));

    if (NewState != DISABLE)
    {
        /* Enable the Interrupt sources */
        TIM2->IER |= (uint8_t)TIM2_IT;
    }
    else
    {
        /* Disable the Interrupt sources */
        TIM2->IER &= (uint8_t)(~(uint8_t)TIM2_IT);
    }
}

/**
  * @brief Enables the TIM2 internal Clock.
  * @par Parameters:
	* None
  * @retval None
  */
void TIM2_InternalClockConfig(void)
{
    /* Disable slave mode to clock the prescaler directly with the internal clock */
    TIM2->SMCR &=  (uint8_t)(~TIM_SMCR_SMS);
}

/**
  * @brief Configures the TIM2 External clock Mode1.
  * @param[in] TIM2_ExtTRGPrescaler : Specifies the external Trigger Prescaler.
  * This parameter can be one of @ref TIM2_ExtTRGPSC_TypeDef enumeration.
  * @param[in] TIM2_ExtTRGPolarity : Specifies the external Trigger Polarity.
  * This parameter can be one of @ref TIM2_ExtTRGPolarity_TypeDef enumeration.
  * @param[in] TIM2_ExtTRGFilter : Specifies the External Trigger Filter.
  * This parameter must be a value between 0x00 and 0x0F
  * @retval None
  */
void TIM2_ETRClockMode1Config(TIM2_ExtTRGPSC_TypeDef TIM2_ExtTRGPrescaler,
                              TIM2_ExtTRGPolarity_TypeDef TIM2_ExtTRGPolarity,
                              uint8_t TIM2_ExtTRGFilter)
{
    /* Configure the ETR Clock source */
    TIM2_ETRConfig(TIM2_ExtTRGPrescaler, TIM2_ExtTRGPolarity, TIM2_ExtTRGFilter);

    /* Select the External clock mode1 */
    TIM2->SMCR &= (uint8_t)(~TIM_SMCR_SMS);
    TIM2->SMCR |= (uint8_t)(TIM2_SlaveMode_External1);

    /* Select the Trigger selection : ETRF */
    TIM2->SMCR &= (uint8_t)(~TIM_SMCR_TS);
    TIM2->SMCR |= (uint8_t)((TIM2_TRGSelection_TypeDef)TIM2_TRGSelection_ETRF);
}

/**
  * @brief Configures the TIM2 External clock Mode2.
  * @param[in] TIM2_ExtTRGPrescaler : Specifies the external Trigger Prescaler.
  * This parameter can be one of the @ref TIM2_ExtTRGPSC_TypeDef enumeration.
  * @param[in] TIM2_ExtTRGPolarity : Specifies the external Trigger Polarity.
  * This parameter can be one of the @ref TIM2_ExtTRGPolarity_TypeDef enumeration.
  * @param[in] TIM2_ExtTRGFilter: Specifies the External Trigger Filter.
  * This parameter must be a value between 0x00 and 0x0F
  * @retval None
  */
void TIM2_ETRClockMode2Config(TIM2_ExtTRGPSC_TypeDef TIM2_ExtTRGPrescaler,
                              TIM2_ExtTRGPolarity_TypeDef TIM2_ExtTRGPolarity,
                              uint8_t TIM2_ExtTRGFilter)
{
    /* Configure the ETR Clock source */
    TIM2_ETRConfig(TIM2_ExtTRGPrescaler, TIM2_ExtTRGPolarity, TIM2_ExtTRGFilter);

    /* Enable the External clock mode2 */
    TIM2->ETR |= TIM_ETR_ECE ;
}

/**
  * @brief Configures the TIM2 External Trigger.
  * @param[in] TIM2_ExtTRGPrescaler : Specifies the external Trigger Prescaler.
  * This parameter can be one of the @ref TIM2_ExtTRGPSC_TypeDef enumeration.
  * @param[in] TIM2_ExtTRGPolarity : Specifies the external Trigger Polarity.
  * This parameter can be one of the @ref TIM2_ExtTRGPolarity_TypeDef enumeration.
  * @param[in] TIM2_ExtTRGFilter : Specifies the External Trigger Filter.
  * This parameter must be a value between 0x00 and 0x0F
  * @retval None
  */
void TIM2_ETRConfig(TIM2_ExtTRGPSC_TypeDef TIM2_ExtTRGPrescaler,
                    TIM2_ExtTRGPolarity_TypeDef TIM2_ExtTRGPolarity,
                    uint8_t TIM2_ExtTRGFilter)
{
    /* Check the parameters */
    assert_param(IS_TIM2_EXT_PRESCALER(TIM2_ExtTRGPrescaler));
    assert_param(IS_TIM2_EXT_POLARITY(TIM2_ExtTRGPolarity));
    assert_param(IS_TIM2_EXT_FILTER(TIM2_ExtTRGFilter));
    /* Set the Prescaler, the Filter value and the Polarity */
    TIM2->ETR |= (uint8_t)((uint8_t)TIM2_ExtTRGPrescaler|(uint8_t)TIM2_ExtTRGPolarity|(uint8_t)TIM2_ExtTRGFilter);
}

/**
  * @brief Configures the TIM2 Trigger as External Clock.
  * @param[in] TIM2_TIxExternalCLKSource : Specifies Trigger source.
  * This parameter can be one of the @ref TIM2_TIxExternalCLK1Source_TypeDef enumeration.
  * @param[in] TIM2_ICPolarity : Specifies the TIx Polarity.
  * This parameter can be @ref TIM2_ICPolarity_TypeDef enumeration.
  * @param[in] TIM2_ICFilter : Specifies the filter value.
  * This parameter must be a value between 0x00 and 0x0F
  * @retval None
  */
void TIM2_TIxExternalClockConfig(TIM2_TIxExternalCLK1Source_TypeDef TIM2_TIxExternalCLKSource,
                                 TIM2_ICPolarity_TypeDef TIM2_ICPolarity,
                                 uint8_t TIM2_ICFilter)
{
    /* Check the parameters */
    assert_param(IS_TIM2_TIXCLK_SOURCE(TIM2_TIxExternalCLKSource));
    assert_param(IS_TIM2_IC_POLARITY(TIM2_ICPolarity));
    assert_param(IS_TIM2_IC_FILTER(TIM2_ICFilter));

    /* Configure the TIM2 Input Clock Source */
    if (TIM2_TIxExternalCLKSource == TIM2_TIxExternalCLK1Source_TI2)
    {
        TI2_Config(TIM2_ICPolarity, TIM2_ICSelection_DirectTI, TIM2_ICFilter);
    }
    else
    {
        TI1_Config(TIM2_ICPolarity, TIM2_ICSelection_DirectTI, TIM2_ICFilter);
    }

    /* Select the Trigger source */
    TIM2_SelectInputTrigger((TIM2_TRGSelection_TypeDef)TIM2_TIxExternalCLKSource);

    /* Select the External clock mode1 */
    TIM2->SMCR |= (uint8_t)(TIM2_SlaveMode_External1);
}

/**
  * @brief Selects the TIM2 Input Trigger source.
  * @param[in] TIM2_InputTriggerSource : Specifies Input Trigger source.
  * This parameter can be one of the @ref TIM2_TRGSelection_TypeDef enumeration.
  * @retval None
  */
void TIM2_SelectInputTrigger(TIM2_TRGSelection_TypeDef TIM2_InputTriggerSource)
{
    uint8_t tmpsmcr = 0;

    /* Check the parameters */
    assert_param(IS_TIM2_TRIGGER_SELECTION(TIM2_InputTriggerSource));

    tmpsmcr = TIM2->SMCR;

    /* Select the Tgigger Source */
    tmpsmcr &= (uint8_t)(~TIM_SMCR_TS);
    tmpsmcr |= (uint8_t)TIM2_InputTriggerSource;

    TIM2->SMCR = (uint8_t)tmpsmcr;
}

/**
  * @brief Enables or Disables the TIM2 Update event.
  * @param[in] NewState : The new state of the TIM2 peripheral Preload register.
  * This parameter can be any of the @ref FunctionalState enumeration.
  * @retval None
  */
void TIM2_UpdateDisableConfig(FunctionalState NewState)
{
    /* Check the parameters */
    assert_param(IS_FUNCTIONAL_STATE(NewState));

    /* Set or Reset the UDIS Bit */
    if (NewState != DISABLE)
    {
        TIM2->CR1 |= TIM_CR1_UDIS;
    }
    else
    {
        TIM2->CR1 &= (uint8_t)(~TIM_CR1_UDIS);
    }
}

/**
  * @brief Selects the TIM2 Update Request Interrupt source.
  * @param[in] TIM2_UpdateSource : Specifies the Update source.
  * This parameter can be one of the @ref TIM2_UpdateSource_TypeDef enumeration.
  * @retval None
  */
void TIM2_UpdateRequestConfig(TIM2_UpdateSource_TypeDef TIM2_UpdateSource)
{
    /* Check the parameters */
    assert_param(IS_TIM2_UPDATE_SOURCE(TIM2_UpdateSource));

    /* Set or Reset the URS Bit */
    if (TIM2_UpdateSource == TIM2_UpdateSource_Regular)
    {
        TIM2->CR1 |= TIM_CR1_URS ;
    }
    else
    {
        TIM2->CR1 &= (uint8_t)(~TIM_CR1_URS);
    }
}

/**
  * @brief Enables or Disables the TIM’s Hall sensor interface.
  * @param[in] NewState : The new state of the TIM2 Hall sensor interface.
  * This parameter can be any of the @ref FunctionalState enumeration.
  * @retval None
  */
void TIM2_SelectHallSensor(FunctionalState NewState)
{
    /* Check the parameters */
    assert_param(IS_FUNCTIONAL_STATE(NewState));

    /* Set or Reset the TI1S Bit */
    if (NewState != DISABLE)
    {
        TIM2->CR2 |= TIM_CR2_TI1S;
    }
    else
    {
        TIM2->CR2 &= (uint8_t)(~TIM_CR2_TI1S);
    }
}

/**
  * @brief Selects the TIM’s One Pulse Mode.
  * @param[in] TIM2_OPMode : Specifies the OPM Mode to be used.
  * This parameter can be one of the @ref TIM2_OPMode_TypeDef enumeration.
  * @retval None
  */
void TIM2_SelectOnePulseMode(TIM2_OPMode_TypeDef TIM2_OPMode)
{
    /* Check the parameters */
    assert_param(IS_TIM2_OPM_MODE(TIM2_OPMode));

    /* Set or Reset the OPM Bit */
    if (TIM2_OPMode == TIM2_OPMode_Single)
    {
        TIM2->CR1 |= TIM_CR1_OPM ;
    }
    else
    {
        TIM2->CR1 &= (uint8_t)(~TIM_CR1_OPM);
    }
}

/**
  * @brief Selects the TIM2 Trigger Output Mode.
  * @param[in] TIM2_TRGOSource : Specifies the Trigger Output source.
  * This parameter can be one of the @ref TIM2_TRGOSource_TypeDef enumeration.
  * @retval None
  */
void TIM2_SelectOutputTrigger(TIM2_TRGOSource_TypeDef TIM2_TRGOSource)
{
    uint8_t tmpcr2 = 0;

    /* Check the parameters */
    assert_param(IS_TIM2_TRGO_SOURCE(TIM2_TRGOSource));

    tmpcr2 = TIM2->CR2;

    /* Reset the MMS Bits */
    tmpcr2 &= (uint8_t)(~TIM_CR2_MMS);

    /* Select the TRGO source */
    tmpcr2 |=  (uint8_t)TIM2_TRGOSource;

    TIM2->CR2 = tmpcr2;
}

/**
  * @brief Selects the TIM2 Slave Mode.
  * @param[in] TIM2_SlaveMode : Specifies the TIM2 Slave Mode.
  * This parameter can be one of the @ref TIM2_SlaveMode_TypeDef enumeration.
  * @retval None
  */
void TIM2_SelectSlaveMode(TIM2_SlaveMode_TypeDef TIM2_SlaveMode)
{
    uint8_t tmpsmcr = 0;

    /* Check the parameters */
    assert_param(IS_TIM2_SLAVE_MODE(TIM2_SlaveMode));

    tmpsmcr = TIM2->SMCR;

    /* Reset the SMS Bits */
    tmpsmcr &= (uint8_t)(~TIM_SMCR_SMS);

    /* Select the Slave Mode */
    tmpsmcr |= (uint8_t)TIM2_SlaveMode;

    TIM2->SMCR = tmpsmcr;
}

/**
  * @brief Sets or Resets the TIM2 Master/Slave Mode.
  * @param[in] NewState : The new state of the synchronization between TIM2 and its slaves (through TRGO).
  * This parameter can be any of the @ref FunctionalState enumeration.
  * @retval None
  */
void TIM2_SelectMasterSlaveMode(FunctionalState NewState)
{
    /* Check the parameters */
    assert_param(IS_FUNCTIONAL_STATE(NewState));

    /* Set or Reset the MSM Bit */
    if (NewState != DISABLE)
    {
        TIM2->SMCR |= TIM_SMCR_MSM;
    }
    else
    {
        TIM2->SMCR &= (uint8_t)(~TIM_SMCR_MSM);
    }
}

/**
  * @brief Configures the TIM2 Encoder Interface.
  * @param[in] TIM2_EncoderMode : Specifies the TIM2 Encoder Mode.
  * This parameter can be one of the @ref TIM2_EncoderMode_TypeDef enumeration.
  * @param[in] TIM2_IC1Polarity : Specifies the IC1 Polarity.
  * This parameter can be one of the @ref TIM2_ICPolarity_TypeDef enumeration.
  * @param[in] TIM2_IC2Polarity : Specifies the IC2 Polarity.
  * This parameter can be one of the @ref TIM2_ICPolarity_TypeDef enumeration.
  * @retval None
  */
void TIM2_EncoderInterfaceConfig(TIM2_EncoderMode_TypeDef TIM2_EncoderMode,
                                 TIM2_ICPolarity_TypeDef TIM2_IC1Polarity,
                                 TIM2_ICPolarity_TypeDef TIM2_IC2Polarity)
{
    uint8_t tmpsmcr = 0;
    uint8_t tmpccmr1 = 0;
    uint8_t tmpccmr2 = 0;

    /* Check the parameters */
    assert_param(IS_TIM2_ENCODER_MODE(TIM2_EncoderMode));
    assert_param(IS_TIM2_IC_POLARITY(TIM2_IC1Polarity));
    assert_param(IS_TIM2_IC_POLARITY(TIM2_IC2Polarity));

    tmpsmcr = TIM2->SMCR;
    tmpccmr1 = TIM2->CCMR1;
    tmpccmr2 = TIM2->CCMR2;

    /* Set the encoder Mode */
    tmpsmcr &= (uint8_t)(TIM_SMCR_MSM | TIM_SMCR_TS)  ;
    tmpsmcr |= (uint8_t)TIM2_EncoderMode;

    /* Select the Capture Compare 1 and the Capture Compare 2 as input */
    tmpccmr1 &= (uint8_t)(~TIM_CCMR_CCxS);
    tmpccmr2 &= (uint8_t)(~TIM_CCMR_CCxS);
    tmpccmr1 |= TIM_CCMR_TIxDirect_Set;
    tmpccmr2 |= TIM_CCMR_TIxDirect_Set;

    /* Set the TI1 and the TI2 Polarities */
    if (TIM2_IC1Polarity == TIM2_ICPolarity_Falling)
    {
        TIM2->CCER1 |= TIM_CCER1_CC1P ;
    }
    else
    {
        TIM2->CCER1 &= (uint8_t)(~TIM_CCER1_CC1P) ;
    }

    if (TIM2_IC2Polarity == TIM2_ICPolarity_Falling)
    {
        TIM2->CCER1 |= TIM_CCER1_CC2P ;
    }
    else
    {
        TIM2->CCER1 &= (uint8_t)(~TIM_CCER1_CC2P) ;
    }

    TIM2->SMCR = tmpsmcr;
    TIM2->CCMR1 = tmpccmr1;
    TIM2->CCMR2 = tmpccmr2;
}

/**
  * @brief Configures the TIM2 Prescaler.
  * @param[in] TIM2_Prescaler : Specifies the Prescaler Register value
  * This parameter can be one of the @ref TIM2_Prescaler_TypeDef enumeration.
  * @param[in] TIM2_PSCReloadMode : Specifies the TIM2 Prescaler Reload mode.
  * This parameter can be one of the @ref TIM2_PSCReloadMode_TypeDef enumeration.
  * @retval None
  */
void TIM2_PrescalerConfig(TIM2_Prescaler_TypeDef TIM2_Prescaler,
                          TIM2_PSCReloadMode_TypeDef TIM2_PSCReloadMode)
{
    /* Check the parameters */
    assert_param(IS_TIM2_PRESCALER(TIM2_Prescaler));
    assert_param(IS_TIM2_PRESCALER_RELOAD(TIM2_PSCReloadMode));

    /* Set the Prescaler value */
    TIM2->PSCR = (uint8_t)(TIM2_Prescaler);

    /* Set or reset the UG Bit */
    if (TIM2_PSCReloadMode == TIM2_PSCReloadMode_Immediate)
    {
        TIM2->EGR |= TIM_EGR_UG ;
    }
    else
    {
        TIM2->EGR &= (uint8_t)(~TIM_EGR_UG) ;
    }
}

/**
  * @brief Specifies the TIM2 Counter Mode to be used.
  * @param[in] TIM2_CounterMode : Specifies the Counter Mode to be used
  * This parameter can be one of the @ref TIM2_CounterMode_TypeDef enumeration.
  * @retval None
  */
void TIM2_CounterModeConfig(TIM2_CounterMode_TypeDef TIM2_CounterMode)
{
    uint8_t tmpcr1 = 0;

    /* Check the parameters */
    assert_param(IS_TIM2_COUNTER_MODE(TIM2_CounterMode));

    tmpcr1 = TIM2->CR1;

    /* Reset the CMS and DIR Bits */
    tmpcr1 &= (uint8_t)((uint8_t)(~TIM_CR1_CMS) & (uint8_t)(~TIM_CR1_DIR));

    /* Set the Counter Mode */
    tmpcr1 |= (uint8_t)TIM2_CounterMode;

    TIM2->CR1 = tmpcr1;
}

/**
  * @brief Forces the TIM2 Channel1 output waveform to active or inactive level.
  * @param[in] TIM2_ForcedAction : Specifies the forced Action to be set to the output waveform.
  * This parameter can be one of the @ref TIM2_ForcedAction_TypeDef enumeration.
  * @retval None
  */
void TIM2_ForcedOC1Config(TIM2_ForcedAction_TypeDef TIM2_ForcedAction)
{
    uint8_t tmpccmr1 = 0;

    /* Check the parameters */
    assert_param(IS_TIM2_FORCED_ACTION(TIM2_ForcedAction));

    tmpccmr1 = TIM2->CCMR1;

    /* Reset the OCM Bits */
    tmpccmr1 &= (uint8_t)(~TIM_CCMR_OCM);

    /* Configure The Forced output Mode */
    tmpccmr1 |= (uint8_t)TIM2_ForcedAction;

    TIM2->CCMR1 = tmpccmr1;
}

/**
  * @brief Forces the TIM2 Channel2 output waveform to active or inactive level.
  * @param[in] TIM2_ForcedAction : Specifies the forced Action to be set to the output waveform.
  * This parameter can be one of the @ref TIM2_ForcedAction_TypeDef enumeration.
  * @retval None
  */
void TIM2_ForcedOC2Config(TIM2_ForcedAction_TypeDef TIM2_ForcedAction)
{
    uint8_t tmpccmr2 = 0;

    /* Check the parameters */
    assert_param(IS_TIM2_FORCED_ACTION(TIM2_ForcedAction));

    tmpccmr2 = TIM2->CCMR2;

    /* Reset the OCM Bits */
    tmpccmr2 &= (uint8_t)(~TIM_CCMR_OCM);

    /* Configure The Forced output Mode */
    tmpccmr2 |= (uint8_t)TIM2_ForcedAction;

    TIM2->CCMR2 = tmpccmr2;
}

/**
  * @brief Enables or disables TIM2 peripheral Preload register on ARR.
  * @param[in] NewState : The new state of the TIM2 peripheral Preload register.
  * This parameter can be any of the @ref FunctionalState enumeration.
  * @retval None
  */
void TIM2_ARRPreloadConfig(FunctionalState NewState)
{
    /* Check the parameters */
    assert_param(IS_FUNCTIONAL_STATE(NewState));

    /* Set or Reset the ARPE Bit */
    if (NewState != DISABLE)
    {
        TIM2->CR1 |= TIM_CR1_ARPE;
    }
    else
    {
        TIM2->CR1 &= (uint8_t)(~TIM_CR1_ARPE);
    }
}

/**
  * @brief Enables or disables the TIM2 peripheral Preload Register on CCR1.
  * @param[in] NewState : The new state of the Capture Compare Preload register.
  * This parameter can be any of the @ref FunctionalState enumeration.
  * @retval None
  */
void TIM2_OC1PreloadConfig(FunctionalState NewState)
{
    /* Check the parameters */
    assert_param(IS_FUNCTIONAL_STATE(NewState));

    /* Set or Reset the OC1PE Bit */
    if (NewState != DISABLE)
    {
        TIM2->CCMR1 |= TIM_CCMR_OCxPE ;
    }
    else
    {
        TIM2->CCMR1 &= (uint8_t)(~TIM_CCMR_OCxPE) ;
    }
}

/**
  * @brief Enables or disables the TIM2 peripheral Preload Register on CCR2.
  * @param[in] NewState : The new state of the Capture Compare Preload register.
  * This parameter can be any of the @ref FunctionalState enumeration.
  * @retval None
  */
void TIM2_OC2PreloadConfig(FunctionalState NewState)
{
    /* Check the parameters */
    assert_param(IS_FUNCTIONAL_STATE(NewState));

    /* Set or Reset the OC2PE Bit */
    if (NewState != DISABLE)
    {
        TIM2->CCMR2 |= TIM_CCMR_OCxPE ;
    }
    else
    {
        TIM2->CCMR2 &= (uint8_t)(~TIM_CCMR_OCxPE) ;
    }
}

/**
  * @brief Configures the TIM2 Capture Compare 1 Fast feature.
  * @param[in] NewState : The new state of the Output Compare Fast Enable bit.
  * This parameter can be any of the @ref FunctionalState enumeration.
  * @retval None
  */
void TIM2_OC1FastCmd(FunctionalState NewState)
{
    /* Check the parameters */
    assert_param(IS_FUNCTIONAL_STATE(NewState));

    /* Set or Reset the OC1FE Bit */
    if (NewState != DISABLE)
    {
        TIM2->CCMR1 |= TIM_CCMR_OCxFE ;
    }
    else
    {
        TIM2->CCMR1 &= (uint8_t)(~TIM_CCMR_OCxFE) ;
    }
}

/**
  * @brief Configures the TIM2 Capture Compare 2 Fast feature.
  * @param[in] NewState : The new state of the Output Compare Fast Enable bit.
  * This parameter can be any of the @ref FunctionalState enumeration.
  * @retval None
  */
void TIM2_OC2FastCmd(FunctionalState NewState)
{
    /* Check the parameters */
    assert_param(IS_FUNCTIONAL_STATE(NewState));

    /* Set or Reset the OC2FE Bit */
    if (NewState != DISABLE)
    {
        TIM2->CCMR2 |= TIM_CCMR_OCxFE ;
    }
    else
    {
        TIM2->CCMR2 &= (uint8_t)(~TIM_CCMR_OCxFE) ;
    }
}

/**
  * @brief Configures the TIM2 event to be generated by software.
  * @param[in] TIM2_EventSource : Specifies the event source.
  * This parameter can be one of the @ref TIM2_EventSource_TypeDef enumeration.
  * @retval None
  */
void TIM2_GenerateEvent(TIM2_EventSource_TypeDef TIM2_EventSource)
{
    /* Check the parameters */
    assert_param(IS_TIM2_EVENT_SOURCE((uint8_t)TIM2_EventSource));

    /* Set the event sources */
    TIM2->EGR |= (uint8_t)TIM2_EventSource;
}

/**
  * @brief Configures the TIM2 Channel 1 polarity.
  * @param[in] TIM2_OCPolarity : Specifies the OC1 Polarity.
  * This parameter can be one of the @ref TIM2_OCPolarity_TypeDef enumeration.
  * @retval None
  */
void TIM2_OC1PolarityConfig(TIM2_OCPolarity_TypeDef TIM2_OCPolarity)
{
    /* Check the parameters */
    assert_param(IS_TIM2_OC_POLARITY(TIM2_OCPolarity));

    /* Set or Reset the CC1P Bit */
    if (TIM2_OCPolarity == TIM2_OCPolarity_Low)
    {
        TIM2->CCER1 |= TIM_CCER1_CC1P ;
    }
    else
    {
        TIM2->CCER1 &= (uint8_t)(~TIM_CCER1_CC1P) ;
    }
}

/**
  * @brief Configures the TIM2 Channel 2 polarity.
  * @param[in] TIM2_OCPolarity : Specifies the OC2 Polarity.
  * This parameter can be one of the @ref TIM2_OCPolarity_TypeDef enumeration.
  * @retval None
  */
void TIM2_OC2PolarityConfig(TIM2_OCPolarity_TypeDef TIM2_OCPolarity)
{
    /* Check the parameters */
    assert_param(IS_TIM2_OC_POLARITY(TIM2_OCPolarity));

    /* Set or Reset the CC2P Bit */
    if (TIM2_OCPolarity == TIM2_OCPolarity_Low)
    {
        TIM2->CCER1 |= TIM_CCER1_CC2P ;
    }
    else
    {
        TIM2->CCER1 &= (uint8_t)(~TIM_CCER1_CC2P) ;
    }
}

/**
  * @brief Enables or disables the TIM2 Capture Compare Channel x.
  * @param[in] TIM2_Channel : Specifies the TIM2 Channel.
  * This parameter can be one of @ref TIM2_Channel_TypeDef enumeration.
  * @param[in] NewState : Specifies the TIM2 Channel CCxE bit new state.
  * This parameter can be any of the @ref FunctionalState enumeration.
  * @retval None
  */
void TIM2_CCxCmd(TIM2_Channel_TypeDef TIM2_Channel,
                 FunctionalState NewState)
{
    /* Check the parameters */
    assert_param(IS_TIM2_CHANNEL(TIM2_Channel));
    assert_param(IS_FUNCTIONAL_STATE(NewState));

    if (TIM2_Channel == TIM2_Channel_1)
    {
        /* Set or Reset the CC1E Bit */
        if (NewState != DISABLE)
        {
            TIM2->CCER1 |= TIM_CCER1_CC1E ;
        }
        else
        {
            TIM2->CCER1 &= (uint8_t)(~TIM_CCER1_CC1E) ;
        }

    }
    else /* if (TIM2_Channel == TIM2_Channel_2) */
    {
        /* Set or Reset the CC2E Bit */
        if (NewState != DISABLE)
        {
            TIM2->CCER1 |= TIM_CCER1_CC2E;
        }
        else
        {
            TIM2->CCER1 &= (uint8_t)(~TIM_CCER1_CC2E) ;
        }
    }

}

/**
  * @brief Selects the TIM2 Ouput Compare Mode. This function disables the
  * selected channel before changing the Ouput Compare Mode. User has to
  * enable this channel using TIM2_CCxCmd and TIM2_CCxNCmd functions.
  * @param[in] TIM2_Channel : Specifies the TIM2 Channel.
  * This parameter can be one of the @ref TIM2_Channel_TypeDef enumeration
  * @param[in] TIM2_OCMode : Specifies the TIM2 Output Compare Mode.
  * This paramter can be one of the @ref TIM2_OCMode_TypeDef enumeration.
  * @retval None
  */
void TIM2_SelectOCxM(TIM2_Channel_TypeDef TIM2_Channel,
                     TIM2_OCMode_TypeDef TIM2_OCMode)
{
    /* Check the parameters */
    assert_param(IS_TIM2_CHANNEL(TIM2_Channel));
    assert_param(IS_TIM2_OCM(TIM2_OCMode));

    if (TIM2_Channel == TIM2_Channel_1)
    {
        /* Disable the Channel 1: Reset the CCE Bit */
        TIM2->CCER1 &= (uint8_t)(~TIM_CCER1_CC1E);

        /* Reset the Output Compare Bits */
        TIM2->CCMR1 &= (uint8_t)(~TIM_CCMR_OCM);

        /* Set the Ouput Compare Mode */
        TIM2->CCMR1 |= (uint8_t)TIM2_OCMode;
    }
    else /* if (TIM2_Channel == TIM2_Channel_2) */
    {
        /* Disable the Channel 2: Reset the CCE Bit */
        TIM2->CCER1 &= (uint8_t)(~TIM_CCER1_CC2E);

        /* Reset the Output Compare Bits */
        TIM2->CCMR2 &= (uint8_t)(~TIM_CCMR_OCM);

        /* Set the Ouput Compare Mode */
        TIM2->CCMR2 |= (uint8_t)TIM2_OCMode;
    }
}

/**
  * @brief Sets the TIM2 Counter Register value.
  * @param[in] TIM2_Counter : Specifies the Counter register new value.
  * This parameter is between 0x0000 and 0xFFFF.
  * @retval None
  */
void TIM2_SetCounter(uint16_t TIM2_Counter)
{

    /* Set the Counter Register value */
    TIM2->CNTRH = (uint8_t)(TIM2_Counter >> 8);
    TIM2->CNTRL = (uint8_t)(TIM2_Counter);
}

/**
  * @brief Sets the TIM2 Autoreload Register value.
  * @param[in] TIM2_Autoreload : Specifies the Autoreload register new value.
  * This parameter is between 0x0000 and 0xFFFF.
  * @retval None
  */
void TIM2_SetAutoreload(uint16_t TIM2_Autoreload)
{
    /* Set the Autoreload Register value */
    TIM2->ARRH = (uint8_t)(TIM2_Autoreload >> 8);
    TIM2->ARRL = (uint8_t)(TIM2_Autoreload);
}

/**
  * @brief Sets the TIM2 Capture Compare1 Register value.
  * @param[in] TIM2_Compare : Specifies the Capture Compare1 register new value.
  * This parameter is between 0x0000 and 0xFFFF.
  * @retval None
  */
void TIM2_SetCompare1(uint16_t TIM2_Compare)
{
    /* Set the Capture Compare1 Register value */
    TIM2->CCR1H = (uint8_t)(TIM2_Compare >> 8);
    TIM2->CCR1L = (uint8_t)(TIM2_Compare);
}

/**
  * @brief Sets the TIM2 Capture Compare2 Register value.
  * @param[in] TIM2_Compare : Specifies the Capture Compare2 register new value.
  * This parameter is between 0x0000 and 0xFFFF.
  * @retval None
  */
void TIM2_SetCompare2(uint16_t TIM2_Compare)
{
    /* Set the Capture Compare2 Register value */
    TIM2->CCR2H = (uint8_t)(TIM2_Compare >> 8);
    TIM2->CCR2L = (uint8_t)(TIM2_Compare);
}

/**
  * @brief Sets the TIM2 Input Capture 1 prescaler.
  * @param[in] TIM2_IC1Prescaler : Specifies the Input Capture prescaler new value
  * This parameter can be one of the @ref TIM2_ICPSC_TypeDef enumeration.
  * @retval None
  */
void TIM2_SetIC1Prescaler(TIM2_ICPSC_TypeDef TIM2_IC1Prescaler)
{
    uint8_t tmpccmr1 = 0;

    /* Check the parameters */
    assert_param(IS_TIM2_IC_PRESCALER(TIM2_IC1Prescaler));

    tmpccmr1 = TIM2->CCMR1;

    /* Reset the IC1PSC Bits */
    tmpccmr1 &= (uint8_t)(~TIM_CCMR_ICxPSC);

    /* Set the IC1PSC value */
    tmpccmr1 |= (uint8_t)TIM2_IC1Prescaler;

    TIM2->CCMR1 = tmpccmr1;
}

/**
  * @brief Sets the TIM2 Input Capture 2 prescaler.
  * @param[in] TIM2_IC2Prescaler : Specifies the Input Capture prescaler new value
  * This parameter can be one of the @ref TIM2_ICPSC_TypeDef enumeration.
  * @retval None
  */
void TIM2_SetIC2Prescaler(TIM2_ICPSC_TypeDef TIM2_IC2Prescaler)
{
    uint8_t tmpccmr2 = 0;

    /* Check the parameters */
    assert_param(IS_TIM2_IC_PRESCALER(TIM2_IC2Prescaler));

    tmpccmr2 = TIM2->CCMR2;

    /* Reset the IC2PSC Bits */
    tmpccmr2 &= (uint8_t)(~TIM_CCMR_ICxPSC);

    /* Set the IC2PSC value */
    tmpccmr2 |= (uint8_t)TIM2_IC2Prescaler;

    TIM2->CCMR2 = tmpccmr2;
}

/**
  * @brief Gets the TIM2 Input Capture 1 value.
  * @par Parameters:
  * None
  * @retval uint16_t : Capture Compare 1 Register value.
  */
uint16_t TIM2_GetCapture1(void)
{
    uint16_t tmpccr1 = 0;
    uint8_t tmpccr1l, tmpccr1h;

    tmpccr1h = TIM2->CCR1H;
    tmpccr1l = TIM2->CCR1L;

    tmpccr1 = (uint16_t)(tmpccr1l);
    tmpccr1 |= (uint16_t)((uint16_t)tmpccr1h << 8);
    /* Get the Capture 1 Register value */
    return ((uint16_t)tmpccr1);
}

/**
  * @brief Gets the TIM2 Input Capture 2 value.
  * @par Parameters:
  * None
  * @retval uint16_t : Capture Compare 2 Register value.
  */
uint16_t TIM2_GetCapture2(void)
{
    uint16_t tmpccr2 = 0;
    uint8_t tmpccr2l, tmpccr2h;

    tmpccr2h = TIM2->CCR2H;
    tmpccr2l = TIM2->CCR2L;

    tmpccr2 = (uint16_t)(tmpccr2l);
    tmpccr2 |= (uint16_t)((uint16_t)tmpccr2h << 8);
    /* Get the Capture 2 Register value */
    return ((uint16_t)tmpccr2);
}

/**
  * @brief Gets the TIM2 Counter value.
  * @par Parameters:
  * None
  * @retval uint16_t : Counter Register value.
  */
uint16_t TIM2_GetCounter(void)
{
    uint16_t tmpcnt = 0;
    uint8_t tmpcntrl, tmpcntrh;

    tmpcntrh = TIM2->CNTRH;
    tmpcntrl = TIM2->CNTRL;

    tmpcnt = (uint16_t)(tmpcntrl);
    tmpcnt |= (uint16_t)((uint16_t)tmpcntrh << 8);
    /* Get the Counter Register value */
    return ((uint16_t)tmpcnt);
}

/**
  * @brief Gets the TIM2 Prescaler value.
  * @par Parameters:
  * None
  * @retval TIM2_Prescaler_TypeDef : Prescaler Register value.
  */
TIM2_Prescaler_TypeDef TIM2_GetPrescaler(void)
{
    /* Get the Prescaler Register value */
    return ((TIM2_Prescaler_TypeDef)TIM2->PSCR);
}

/**
  * @brief Checks whether the specified TIM2 flag is set or not.
  * @param[in] TIM2_FLAG : Specifies the flag to check.
  * This parameter can be one of the @ref TIM2_FLAG_TypeDef enumeration.
  * @retval FlagStatus : The new state of TIM2_FLAG.
	* This parameter can be any of the @ref FlagStatus enumeration.
  */
FlagStatus TIM2_GetFlagStatus(TIM2_FLAG_TypeDef TIM2_FLAG)
{
    __IO FlagStatus bitstatus = RESET;
    __IO uint8_t tim2_flag_l, tim2_flag_h;

    /* Check the parameters */
    assert_param(IS_TIM2_GET_FLAG(TIM2_FLAG));

    tim2_flag_l = (uint8_t)(TIM2_FLAG);
    tim2_flag_h = (uint8_t)((uint16_t)TIM2_FLAG >> 8);

    if (((TIM2->SR1 & tim2_flag_l) | (TIM2->SR2 & tim2_flag_h)) != 0)
    {
        bitstatus = SET;
    }
    else
    {
        bitstatus = RESET;
    }
    return ((FlagStatus)bitstatus);
}

/**
  * @brief Clears the TIM’s pending flags.
  * @param[in] TIM2_FLAG : Specifies the flag to clear.
  * This parameter can be one of the @ref TIM2_FLAG_TypeDef enumeration.
  * @retval None
  */
void TIM2_ClearFlag(TIM2_FLAG_TypeDef TIM2_FLAG)
{
    /* Check the parameters */
    assert_param(IS_TIM2_CLEAR_FLAG((uint16_t)TIM2_FLAG));
    /* Clear the flags (rc_w0) clear this bit by writing 0. Writing ‘1’ has no effect*/
    TIM2->SR1 = (uint8_t)(~(uint8_t)(TIM2_FLAG));
    TIM2->SR2 = (uint8_t)(~(uint8_t)((uint16_t)TIM2_FLAG >> 8));
}

/**
  * @brief Checks whether the TIM2 interrupt has occurred or not.
  * @param[in] TIM2_IT : Specifies the TIM2 interrupt source to check.
  * This parameter can be one of the @ref TIM2_IT_TypeDef enumeration.
  * @retval ITStatus : The new state of the TIM2_IT.
	* This parameter can be any of the @ref ITStatus enumeration.
  */
ITStatus TIM2_GetITStatus(TIM2_IT_TypeDef TIM2_IT)
{
    __IO ITStatus bitstatus = RESET;

    __IO uint8_t TIM2_itStatus = 0x0, TIM2_itEnable = 0x0;

    /* Check the parameters */
    assert_param(IS_TIM2_GET_IT(TIM2_IT));

    TIM2_itStatus = (uint8_t)(TIM2->SR1 & (uint8_t)TIM2_IT);

    TIM2_itEnable = (uint8_t)(TIM2->IER & (uint8_t)TIM2_IT);

    if ((TIM2_itStatus != (uint8_t)RESET ) && (TIM2_itEnable != (uint8_t)RESET ))
    {
        bitstatus = (ITStatus)SET;
    }
    else
    {
        bitstatus = (ITStatus)RESET;
    }
    return ((ITStatus)bitstatus);
}

/**
  * @brief Clears the TIM's interrupt pending bits.
  * @param[in] TIM2_IT : Specifies the pending bit to clear.
  * This parameter can be one of the @ref TIM2_IT_TypeDef enumeration.
  * @retval None
  */
void TIM2_ClearITPendingBit(TIM2_IT_TypeDef TIM2_IT)
{
    /* Check the parameters */
    assert_param(IS_TIM2_IT(TIM2_IT));

    /* Clear the IT pending Bit */
    TIM2->SR1 = (uint8_t)(~(uint8_t)TIM2_IT);
}

/**
  * @brief Configure the TI1 as Input.
  * @param[in] TIM2_ICPolarity : The Input Polarity.
  * This parameter can be one of the @ref TIM2_ICPolarity_TypeDef enumeration.
  * @param[in] TIM2_ICSelection : Specifies the input to be used.
  * This parameter can be one of the @ref TIM2_ICSelection_TypeDef enumeration.
  * @param[in] TIM2_ICFilter : Specifies the Input Capture Filter.
  * This parameter must be a value between 0x00 and 0x0F.
  * @retval None
  */
static void TI1_Config(TIM2_ICPolarity_TypeDef TIM2_ICPolarity, \
                       TIM2_ICSelection_TypeDef TIM2_ICSelection, \
                       uint8_t TIM2_ICFilter)
{
    uint8_t tmpccmr1 = 0;
    uint8_t tmpicpolarity = TIM2_ICPolarity;
    tmpccmr1 = TIM2->CCMR1;

    /* Check the parameters */
    assert_param(IS_TIM2_IC_POLARITY(TIM2_ICPolarity));
    assert_param(IS_TIM2_IC_SELECTION(TIM2_ICSelection));
    assert_param(IS_TIM2_IC_FILTER(TIM2_ICFilter));

    /* Disable the Channel 1: Reset the CCE Bit */
    TIM2->CCER1 &=  (uint8_t)(~TIM_CCER1_CC1E);

    /* Select the Input and set the filter */
    tmpccmr1 &= (uint8_t)(~TIM_CCMR_CCxS) & (uint8_t)(~TIM_CCMR_ICxF);
    tmpccmr1 |= (uint8_t)(((uint8_t)(TIM2_ICSelection)) | ((uint8_t)(TIM2_ICFilter << 4)));

    TIM2->CCMR1 = tmpccmr1;

    /* Select the Polarity */
    if (tmpicpolarity == (uint8_t)(TIM2_ICPolarity_Falling))
    {
        TIM2->CCER1 |= TIM_CCER1_CC1P;
    }
    else
    {
        TIM2->CCER1 &= (uint8_t)(~TIM_CCER1_CC1P);
    }

    /* Set the CCE Bit */
    TIM2->CCER1 |=  TIM_CCER1_CC1E;
}

/**
  * @brief Configure the TI2 as Input.
  * @param[in] TIM2_ICPolarity : The Input Polarity.
  * This parameter can be one of the @ref TIM2_ICPolarity_TypeDef enumeration.
  * @param[in] TIM2_ICSelection : Specifies the input to be used.
  * This parameter can be one of the @ref TIM2_ICSelection_TypeDef enumeration.
  * @param[in] TIM2_ICFilter : Specifies the Input Capture Filter.
  * This parameter must be a value between 0x00 and 0x0F.
  * @retval None
  */
static void TI2_Config(TIM2_ICPolarity_TypeDef TIM2_ICPolarity,
                       TIM2_ICSelection_TypeDef TIM2_ICSelection,
                       uint8_t TIM2_ICFilter)
{
    uint8_t tmpccmr2 = 0;
    uint8_t tmpicpolarity = TIM2_ICPolarity;

    /* Check the parameters */
    assert_param(IS_TIM2_IC_POLARITY(TIM2_ICPolarity));
    assert_param(IS_TIM2_IC_SELECTION(TIM2_ICSelection));
    assert_param(IS_TIM2_IC_FILTER(TIM2_ICFilter));

    tmpccmr2 = TIM2->CCMR2;

    /* Disable the Channel 2: Reset the CCE Bit */
    TIM2->CCER1 &=  (uint8_t)(~TIM_CCER1_CC2E);

    /* Select the Input and set the filter */
    tmpccmr2 &= (uint8_t)(~TIM_CCMR_CCxS) & (uint8_t)(~TIM_CCMR_ICxF);
    tmpccmr2 |= (uint8_t)(((uint8_t)(TIM2_ICSelection)) | ((uint8_t)(TIM2_ICFilter << 4)));

    TIM2->CCMR2 = tmpccmr2;

    /* Select the Polarity */
    if (tmpicpolarity == TIM2_ICPolarity_Falling)
    {
        TIM2->CCER1 |= TIM_CCER1_CC2P ;
    }
    else
    {
        TIM2->CCER1 &= (uint8_t)(~TIM_CCER1_CC2P) ;
    }

    /* Set the CCE Bit */
    TIM2->CCER1 |=  TIM_CCER1_CC2E;
}
/**
  * @brief Compute the frequency of the LSI clock expressed in Herz.
  * @param[in] TIM2_TimerClockFreq : The TIM2 clock frequency expressed in Herz.
  * @retval uint32_t : LSI Clock Frequency value.
  * @par Required preconditions:
  *  The timer clock must be a high speed clock: HSI or HSE
  * @note It is recommended to use the maximum clock frequency, that is 10 MHz, to obtain a more precise result.
  */
uint32_t TIM2_ComputeLsiClockFreq(uint32_t TIM2_TimerClockFreq)
{
    uint32_t LSIClockFreq;
    uint16_t ICValue1, ICValue2;

    /* Capture only every 8 events!!! */
    TIM2_ICInit(	TIM2_Channel_1, TIM2_ICPolarity_Rising, TIM2_ICSelection_DirectTI, TIM2_ICPSC_Div8, 0x0);

    /* Enable CC1 interrupt */
    TIM2_ITConfig(TIM2_IT_CC1, ENABLE);

    /* Enable TIM2 */
    TIM2_Cmd(ENABLE);

    TIM2->SR1 = 0x00;
    TIM2->SR2 = 0x00;

    /* Clear CC1 Flag*/
    TIM2_ClearFlag(TIM2_FLAG_CC1);

    /* wait a capture on cc1 */
    while ((TIM2->SR1 & (uint8_t)TIM2_FLAG_CC1) != TIM2_FLAG_CC1)
    {
    }
    /* Get CCR1 value*/
    ICValue1 = TIM2_GetCapture1();
    TIM2_ClearFlag(TIM2_FLAG_CC1);

    /* wait a capture on cc1 */
    while ((TIM2->SR1 & (uint8_t)TIM2_FLAG_CC1) != TIM2_FLAG_CC1)
    {
    }
    /* Get CCR1 value*/
    ICValue2 = TIM2_GetCapture1();
    TIM2_ClearFlag(TIM2_FLAG_CC1);

    /* Disable IC1 input capture */
    TIM2->CCER1 &= (uint8_t)(~TIM_CCER1_CC1E);
    /* Reset CCMR1 register */
    TIM2->CCMR1 = 0x00;
    /* Disable TIM2 */
    TIM2_Cmd(DISABLE);

    /* Compute LSI clock frequency */
    LSIClockFreq = (8 * TIM2_TimerClockFreq) / (ICValue2 - ICValue1);
    return LSIClockFreq;
}
/**
  * @brief Checks whether the TIM2 device is enabled or not.
  * @par Parameters:
  * None
  * @retval FunctionalState : The new state of the TIM2 device.
  * This parameter can be any of the @ref FunctionalState enumeration.
  */
FunctionalState TIM2_GetStatus(void)
{
    return ((FunctionalState) (TIM2->CR1 & TIM_CR1_CEN));
}

/**
  * @}
  */

/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/